User guide

821697: AMP1-16 Series User Guide

Appendix A Downloading Software

Requirements

To perform this procedure you will need:

• A PC with an Internet connection

• Your product’s serial number (if you have not already created a user

ID and password for the Wohler web site)

Downloading the File

1. Power up your laptop and launch the web browser.

2. Create a folder on your desktop called AMP1-16 Upgrade.

3. Navigate to the wohler web site: www.wohler.com.

4. Once you have successfully logged into the Wohler web site, click

Products from the home page menu bar.

A. Move the cursor down the menu to highlight

Audio.

B. Then move the cursor to the sub-menu to highlight SDI.

C. Finally, move the cursor to the third menu to click on

AMP1-16-3G or AMP1-E16-3G. (Figure A–1 on page 87.)

Decision Point:

If you already have a member user ID and password for the Wohler

web site, then log in by clicking on the Member Sign In link at the top

right hand corner of the home page and sign in.

Otherwise, if you do not already have a member user ID and password

then you must click Register as New User at the top right hand corner

of the home page, and enter the requested data. Remember to log in

after you have created your account.