User guide

821697: AMP1-16 Series User Guide

Chapter 6 System Maintenance

Upgrade Requirements

• An AMP1-16-3G or AMP1-E16-3G connected to a Local Area

Network (LAN) or connected to a host computer with a direct

Ethernet connection.

• The AMP1-16-3G update package (typically downloaded from the

Wohler web site: www.wohler.com—see Appendix A on page 85),

which includes:

• NetBurner IPSetup V2.0 or later (

IPSetup.exe).

• NetBurner AutoUpdate V2.0 or later (AutoUpdate.exe).

• A host computer running Windows XP connected to the same LAN.

(Other Windows operating systems may work, but are untested.)

• The unit’s main processor software (AMP1_16_Vx.xx _APP.s19)

also included in the unit’s update package.

• If you are using a LAN connection, you will need two standard

Ethernet cables—not crossover cables.

If you are using a direct connection you will need a single crossover

Ethernet cable.

• If you are updating the unit’s firmware for one of the unit’s sub-

processors, you will also need one or more of the following files

which are also included with the update package. The actual file

names will likely have version information appended to them.

• Audio_Vxx.xx.S19

• Video_Vxx.xx.S19

• Dolby_Vx.x.x.x.S19

• Grpx0_Vxx.xx.S19

• Grpx1_Vxx.xx.S19

• Grpx2_Vxx.xx.S19

• DSP_Vxx.xx.S19