User guide

821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
63
Chapter 5 Menu List
Screen Information Setup Menu
• Screen Information Menu: Displays Screen Information Setup
Menu
so you can set up and display a variety of parameters for the
video screen.
• Cluster Configuration Menu: Displays the Cluster
Configuration Menu
so you can set up and name meter clusters.
• Loudness Menu: Displays the
Loudness Configuration Menu so
you can set up parameters that affect the measurement of loudness.
• Option Menu: Displays the Option Menu so you can set up
parameters relative to miscellaneous options and preferences, as
well as access the hardware configuration and upgrade software.
(See Option Configuration Menu on page 60 and Chapter 6 for
details.)
Screen Information Setup Menu
Figure 5–19 below shows some of the metadata that can be displayed
on the screens of the AMP1-16. The Dolby Decoder supplies all but one
of the metadata parameters. The exception is the video mode, which is
determined by the signal present at the selected SDI input.
Metadata parameters that are not available when the main screen is
displayed are given the value N/A.
Figure 5–19 Screen Information Setup Menu
• Format: Pressing this button moves the highlight between the two
possible screen formats:
Screen Information Setup Menu
Middle
Screen
Displayed
Data
Format
Right
Screen
Multiple Lines of Data
Single Line of Data
Single Line of Data
Video Mode
AC3 Data Rate
Bitstream Mode
AC-3 Coding Mode
Dial Norm
Bitstream Format
Video Frame Sync Status
Input Video Frame Rate
Dolby E Selected Program
Program Configuration
Dolby Digital Sample Rate
Data Field
Color
Data Text
Color
DataVideo
Left
Screen