User guide

821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
56
Chapter 5 Menu List
Meter Configuration Menu
• Pressing the Balance knob while the highlight is over the button
label displays the
Text Entry Menu. There, you can change the
name of the label.
• Pressing the
Balance knob while the mute/solo/pre/off field is
highlighted toggles these four option. As each option appears, the
color scheme and other elements change as shown in Figure 5–13.
• Pressing the
Balance knob while a channel is highlighted selects or
deselects this channel from the set of solos or mutes applying to this
button.
• Pressing the
Balance knob while a preset is highlighted, selects it
and deselects any other preset that was already selected.
Meter Configuration Menu
Figure 5–14 Meter Configuration Menu
• Meter Scale: Rotating the
Balance knob after pressing this button
selects the possible scales for the level meters. Seven selections are
available as shown in Table 5–2 below.
Meter Configuration Menu
Set Default
-20 dBFS
15
-30 dBFS
12
4
0 dBr =
0 dBFS
Reference
Upper
Segment
Middle
Segment
Lower
Segment
AES
SingleFloat
VUBar
Scale
Ballistics
0
-60
-50
-40
-30
-10
-20
Table 5–2 Audio Scale Specification Domains and Defaults
Scale
Volume
Default Color
Bounds
Default Ballistics
Lower
Bound
Upper
Bound
Default
References
Lower Upper Float Bar
AES -72 dBFS 0.0 dBFS 0 dBFS = 0 dBFS -30 dBFS -20 dBFS IEC Type I VU
VU -45 dBr +3.5 dBr -20 dBFS = 0 dBr -3 dBr 0 dBr None VU
Extd VU -56 dBr +16.0 dBr -20 dBFS = 0 dBr -10 dBr 0 dBr None VU