User guide

821697: AMP1-16 Series User Guide

Chapter 5 Menu List

Main Screen

• Loudness Window: This control is active only when Program

Loudness Mode

is selected. Pressing this button and then rotating

the Balance knob adjusts the averaging time between values of 1

second and 60 seconds by one second increments.

• GPO Activate: You can use the loudness level to trigger an external

function through GPO 1. This control sets the loudness threshold at

which GPO1 is activated. Press this button and then rotate the

Balance knob to select the desired level. In the Loudness Off

mode, this control doesn’t function, and GPO 1 is set to off.

• Cluster Select: Loudness may only be displayed for one cluster at a

time. Press this button and then rotate the Balance knob to select

the desired cluster. In

the Loudness Off mode, this control

doesn’t function.

If a cluster already has channel contributions assigned, this control

is grayed and does not function. To use this control in this case,

press the Clear Loudness button first. You will then be able to

select a different cluster.

Main Screen

The Main Screen will appear as shown in Figure 5–12 at power up

unless the settings in the Video Screen Configuration Menu have

been changed.