User guide

821697: AMP1-16 Series User Guide

Chapter 5 Menu List

Dolby Setup Menu

• Default 2-4-8: Pressing this button and then rotating the Balance

knob selects two, four, or eight. Pressing the

Balance knob

reformats the screen to form:

• Two clusters of eight channels each,

• Four clusters of four channels each, or

• Eight clusters of two channels each.

The factory default is eight clusters of two channels each.

Dolby Setup Menu

Figure 5–8 Dolby Setup Menu

• Decoder Source: Pressing this control and then rotating the

Balance knob selects the source of the Dolby CAT 552 card. The

source choices include all AES input pairs and all SDI de-embedded

pairs.

• Pro-16 Mode Channel: Pressing this control and then rotating the

Balance knob selects the Pro-16 Mode channel.

• Dolby E Program: Pressing this control and then rotating the

Balance knob selects the Dolby E program.

• Bitstream Detect: This field allows you to identify how you want

the monitor to respond in the absence of the Dolby bitstream. Press

this button and rotate the balance control to cycle through the three

available options: Automatic, Dolby E or Mute, and Dolby

Digital or Mute

Dolby Setup Menu

SDI In Channels 7/8

Decoder

Source

Program 1

Dolby E

Program

Channel 1

Pro-16

Mode Ch

Bitstream

Detect

Automatic

Dolby E or Mute

Dolby Digital or Mute