User guide

821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
47
Chapter 5 Menu List
Cluster Configuration Menu
Cluster Configuration Menu
Figure 5–7 Cluster Configuration Menu
This menu allows you to configure the clustering of the channels on the
Main Screen. Cluster labels can also be changed from this menu.
With the combination of the controls in the Monitor Mixer
Configuration Menu
, and the channel clustering in this menu, you
have a very powerful, intuitive tool to arrange the metering and
monitoring options on the Main Screen so you can tell at a glance
what is happening with the monitored sources.
Cluster Start: Pressing this button and then rotating the Balance
knob moves the left side of the blue bracket to select the starting
channel of a cluster. Pressing the Balance knob sets the new
cluster.
Edit Cluster Label: Pressing this control proceeds to the Label
Menu
to allow you to enter or change the cluster label, shown in the
Figure 5–7 as “Pair 1.”
Cluster End: Pressing this button and then rotating the
Balance
knob moves the right side of the blue bracket to select the ending
channel of a cluster. Pressing the
Balance knob sets the new
cluster. Channels from other existing clusters are automatically
removed and added to the one being set.
Select Cluster: Pressing this button and then rotating the Balance
knob moves the blue selection bracket from cluster to cluster to
allow adjustment of each one.
Cluster Configuration Menu
Edit
Label
Cluster
End
Cluster
Start
Select
Cluster
Default
2-4-8
-60
P
a
i
r
5
P
a
i
r
6
P
a
i
r
7
P
a
i
r
8
P
a
i
r
1
P
a
i
r
2
P
a
i
r
3
P
a
i
r
4
1 2