User guide

821697: AMP1-16 Series User Guide

Chapter 5 Menu List

Configuration Selection Menu

Figure 5–6 Configuration Selection Menu

• Recall a Preset: To recall a preset, press the button, rotate the

Balance knob until the desired preset is shown, and then press the

Balance knob.

• SDI Source: Press the button to toggle between the two sources.

• Monitor Menu: Pressing this button calls up the Monitor Mixer

Configuration

screen, which allows you to define the mix of input

pairs you hear in the speakers and other outputs.

• Screen Display Menu: Progresses to another menu screen which

contains access to other menus to configure what is displayed on the

Main Screen.

• Preset Configuration Menu: Progresses to a menu to save, name,

and manage presets.

• Analog Output Menu: Displays the

Analog Output Menu where

you can set up and adjust the four analog output pairs.

• AES Output Menu: Displays the AES Output Menu where you

can set up and adjust the eight AES output pairs.

• Dolby Setup: Displays the Dolby Configuration Menu where

you can set up the Dolby decoder parameters. This button only

appears on the AMP1-E16-3G.

Configuration Selection Menu

Monitor Menu

Preset ManagementRecall a Preset

SDI Source

Screen Display

Analog Output

AES Output Menu

Late Show

Dolby Menu