User guide

821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
42
Chapter 5 Menu List
AES Output Configuration Menu
AES Output Configuration Menu
Figure 5–2 AES Output Configuration Menu
(Selected Sources)
Figure 5–3 AES Output Configuration Menu
(Monitor Channels)
• AES Output: This button will either be labeled
AES Output =
Selected Sources
or AES Output = Monitor Channels as
shown in the two figures above. Pressing this button highlights it.
Subsequent presses toggle between its two choices. If the AES
Output = Selected Sources
is chosen, the Balance knob can
then be rotated to select rotated to select no source (
None) or the
SDI or AES pair is assigned as a source. In a unit with Dolby
enabled, the five decoded output pairs are added.
• Affected by Solos & Mutes: This option is only available when the
AES output is set to monitor channels. When it is not available, it is
disabled and the options are set to No. When it is available, it
determines whether the
Main Screen solo and mute buttons will
AES Output Configuration Menu
AES Output Channels 5/6 AES Output Channels 7/8
+0 +0 +0 +0
Level Trim
65 65 87 87
Affected by
Volume Control
Affected by
Solos & Mutes
Output Mute
With Headphone
AES Output =
Selected Sources
No
No
No
No
Yes
SDI In Channels 7/8SDI In Channels 3/4
Channel Output
AES Channel Pair
AES Output Configuration Menu
AES Output Channels 5/6 AES Output Channels 7/8
+0 +0 +0 +0
Level Trim
Affected by
Volume Control
Affected by
Solos & Mutes
Output Mute
With Headphone
Channel Output
No
Yes
Yes
Yes
Yes
AES Output =
Monitor Channels
65 65 87 87
SDI In Channels 7/8SDI In Channels 3/4
AES Channel Pair