User guide

821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
31
Chapter 4 Efficiency Enhancements
Hot Keys
Creating a Preset Hot Key
Presets can be either defined or selectable. For more information on
creating a preset, refer to Presets on page 26.
Naming/Renaming a Hot Key
Once you have successfully defined a hot key’s functionality, you can
rename the label that displays on the
Main Screen.
1. From the
Configuration Selection Menu, press the Screen
Display Menu
button to display the Screen Display Menu.
5. When Channel 4 is highlighted, press the
Balance knob to select
it.
6. Now rotate the Balance knob again until you highlight
Channel 8.
7. When Channel 8 is highlighted, press the Balance knob to select
it.
8. Use this same procedure to unselect any channels that are selected
that you do not want to mute.
9. Continue on to the Hot Key Naming Example on page 32.
Selectable
Preset
Hot Key
Example
In this example we will modify the bottom, left-hand knob so that it
becomes a preset hot key.
1. On the Main Screen Hot Key Configuration Menu, press the
bottom, left-hand button to highlight the button’s label.
2. Rotate the Balance knob until the function field (displaying Off,
Solo, Mute, or Pre) is highlighted.
3. Press the knob repeatedly until
Preset to Recall displays.
4. Now, rotate the
Balance knob again to highlight the desired
preset to recall or Selectable.
5. Press the knob to select the desired preset to recall or
Selectable.