User guide

821697: AMP1-16 Series User Guide

Chapter 4 Efficiency Enhancements

Hot Keys

in another. Note that both the mute and the solo functions allow you to

select more than one channel.

Defining/Modifying a Hot Key

1. From the Configuration Selection Menu, press the Screen

Display Menu

button to display the Screen Display Menu.

2. Press the

Hot Key Menu button to display the Main Screen Hot

Key Button Configuration Menu

3. To select a button to define, press that button to highlight its name.

4. Rotate the

Balance button to move the highlight to the function

field, which will read either solo, mute, pre (short for preset), or

off.

5. Pressing the Balance knob selects the function displayed: off,

mute

, solo, or pre.

6. Once the function you want is highlighted, rotate the Balance

knob again to sequence the highlight through each of the channel

numbers (or preset numbers).

7. To select a channel for this function, press the Balance knob when

the channel you want is highlighted. Unselecting a channel works

the same way.

8. Selecting a preset works similarly, except that only one preset may

be selected for each hot key.

Hot Key

Example

In this example we will modify Button 8 to mute Channels 4 and 8.

1. On the

Main Screen Hot Key Button Configuration Menu,

press the bottom, right-hand button.

2. Rotate the Balance knob to highlight the function field.

3. Press the

Balance knob repeatedly until the function field

displays

Mute.

4. Now rotate the

Balance knob again until you highlight

Channel 4.