User guide
821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
27
Chapter 4 Efficiency Enhancements
Presets
1. From the Configuration Selection Menu, press the Recall
Preset
button to recall a preset. Rotate the Balance knob to select
the desired preset, and then press the Balance knob. Now the
complete system configuration saved in that preset becomes the
current configuration of the AMP1-16 Series monitor.
2. Using the Hot Key Configuration Menu, you can assign any of
the eight hot keys surrounding the Main screen to function as a
preset changer. This is the quickest way to change the presets
because it only involves pressing a single hot key.
3. Again, using the Hot Key Configuration Menu, you can assign
one of the eight hot keys surrounding the Main screen to become
a selectable preset. To use this hot key, press it, rotate the Balance
knob to select the desired preset, then press the Balance knob.
This selected preset will then take effect.
Naming or Renaming
This section describes how to name or rename a preset, hot key, or
cluster.
1. From the Configuration Selection Menu, press the Preset
Management
button to display the Preset Configuration
Menu
.
2. In the Preset Configuration Menu, press the Rename Preset
key.
3. Rotate the
Balance knob to select the preset you want to rename,
and press the Balance knob to display the Label Menu.
4. If needed, press the
Backspace button until the unwanted text
disappears.
5. Use the Shift button to toggle between upper and lower case
letters. Note that the symbols (on the bottom row) remain
constant.
Label
Example
In this example, we will create a label: My Config.
1. Press the
Shift button to display the upper case character set.