User guide

821697: AMP1-16 Series User Guide

Chapter 4 Efficiency Enhancements

Presets

Overview

Modifying the menu settings allows you to configure the entire

AMP1-16 Series monitor to function exactly the way you want it to for

your specific application. This complete system configuration is called

a preset. After saving the preset, you can then quickly recall it by

pressing a single button. Presets are often used to quickly select

different combinations of inputs to monitor. Moreover, the monitor has

the capacity to hold eight presets; that is, eight complete system

configurations.

Saving Presets

You can save new configuration changes to the same preset or to a

different one. If you would like to have two presets that are largely the

same except for certain settings, set up one of them first and save it to

the first preset. Then make the changes that differentiate the two

presets and save this to a second preset. You can then recall either

preset as you need it.

1. Once you have the monitor configured the way you want it, press

the Manage Presets button (from the Configuration

Selection Menu

) to display the Preset Management Menu.

2. Press the Save Current button and then rotate the Balance knob

to display the preset number you want to save the configuration

to.

3. Press the

Balance knob to save the preset. This will take you to

the Label Menu where you can rename the preset.

4. Once you have labeled the preset, press Save until you get back to

the Main Screen.

5. To return to the Main Screen, press the Save/Exit button twice.

Recalling Presets

You can recall the preset of your choice at any time in several different

ways: