User guide

821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
19
Chapter 2 Audio and Metering
Level Metering
Metering Menus
The display of the level meters and related visual indications is
determined as follows:
1. The source for each of the 16 level meters is set in the Monitor
Mixer Configuration Menu.
The phase indicators are also
enabled or disabled in this menu.
2. The meter scale, ballistics, limits, reference level, as well as
segment colors and transition points are set in the Meter
Configuration Menu
.
3. The clustering of the meters into logical arrangements is set in the
Cluster Configuration Menu.
4. The loudness indication is set up in the Loudness
Configuration Menu
.
Note:
The Volume and Balance levels also display
graphically at the top of the Main Screen while you
are adjusting them.