User guide

821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
18
Chapter 2 Audio and Metering
Level Metering
Level Metering
Overview
The AMP1-16 Series monitors are capable of showing 16 level meters
simultaneously along with a loudness indication. The signals for the
level metering are always the same ones that are monitored through the
Monitor Mixer Menu, which also controls the internal speakers.
These signals may be de-embedded SDI audio, AES audio, decoded
Dolby, or a combination of input types.
Figure 2–6 illustrates the menus used to modify the audio meters: the
various signal inputs, the menus used to configure them, and their
outputs.
Figure 2–6 Meter Routing Diagram
3G SDI Input 1
3G SDI Input 2
3G SDI Output
AES Inputs
Right ScreenMiddle Screen
Left
Screen
8 AES Pairs
8 De-embedded SDI Pairs
Configuration Selection
Recall Preset1
SDI Source2
Monitor Menu3
Screen Menu4 Dolby
Preset Mgmt 5
Analog Out 6
7AES Out
8
Dolby Configuration Menu
Decoder Src1
Pro16 Mode2
Dolby E Pgm3
4
5
Bitstream Det 6
7
8
Monitor Mixer Config Menu
Sel Channel1
Channel Trim2
Spkr Assign3
Mute Spkrs4
Audio Delay 5
Channel Src 6
7
Phase LED 8
Loudness Config Menu
Loudness Cfg1
Channel Sel2
Loud Contrib3
Loud Window4
GPO Activate 5
Cluster Sel. 6
7
Clr Loudness 8
Cluster Label Menu
1
2
Shift3
Select4
Backspace 5
Revert 6
7
Sel Existing 8
Meter Config Menu
Scale1
Ballistics2
3
Set Default4
Reference 5
Upper Seg 6
Middle Seg 7
Lower Seg 8