User guide

821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
16
Chapter 2 Audio and Metering
Configuring the Audio Outputs
C. The AES input pairs can be converted into analog audio.
4. Each AES or analog output channel has its own individual volume
trim control with a range from -60 to +12 dB in 1 dB steps.
5. You can turn each channel on or off independently.
The pin-out of the unbalanced AES output connectors is listed in Table
2–2 below.
Table 2–1 Available Signal Types/Channels
Signal Sources Available Channel Pairs
SDI 1 through 8
AES 1 through 8
Dolby 1 through 5
Monitor Mix 1 through 8
Off
Table 2–2 Unbalanced AES Output Connector Pin
Out
Pin
AES Out 1-4
Function
AES Out 5-8
Function
Use
1. AES Pair 1 AES Pair 5
Unbalanced AES
Outputs
2. AES Pair 2 AES Pair 6
3. AES Pair 3 AES Pair 7
4. Ground Ground
Chassis Ground
Return
5. Ground Ground
6. Ground Ground
7. Ground Ground
8. Ground Ground
9. Ground Ground
10. Ground Ground
11. Ground Ground
12. Ground Ground
13.
AES Pair 4 AES Pair 8
Unbalanced AES
Outputs
14. Ground Ground
Chassis Ground
Return
15. Ground Ground