User guide

821697: AMP1-16 Series User Guide

Chapter 1 Quick Start

Using the Monitor

speakers entirely. Pressing it a third time brings the internal speaker

volume back to normal. Turning the knob to increase the volume

increases it from the current volume, whether from the 20dB dip or

from the completely muted state.

The right knob adjusts the

Balance between the speakers. Pressing the

knob returns the audio balance to center. This knob is also used for

setting adjustments when programming the options and features in the

configuration menus.

Video Screen: This monitor (left) displays either video and/or data

such as help for the

Menu and Data Screens.

Menu and Data Screens: These two screens on the right work together

to display bar graphs and the configuration menus.

Hot Keys/Push Buttons: Ten buttons are used for menu navigation

and hot key access to solo, mute, and preset functions.

Back Panel

The AMP1-16-3G and AMP1-E16-3G back panel contains all of the

connectors except for the headphone jack as shown in Figure 1–2

below.

Figure 1–2 Back Panel Layout

• Power: The AMP1-16-3G and AMP1-E16-3G use a standard IEC

power cord for the 100 to 240 VAC power connection.

• Ethernet: The Ethernet port is used for system software upgrades.

• Serial: This DB-9F connector is used for system software upgrades.

• Analog Outputs: This DB-25F connector provides eight channels of

balanced analog outputs.The source of these signals is controlled by

Power Ethernet Serial GPI/O

AES Outputs

(1 - 4 and 5 - 8)

AES Inputs HD/SD-SDI Inputs

3G/HD/SD-SDI

Re-Clocked Output

Analog Output