User guide

821697: AMP1-16 Series User Guide

Chapter 1 Quick Start

Using the Monitor

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Using the Monitor

This section provides a brief overview of the controls on the front

panel, and the connectors on the back panel of the monitor.

Front Panel

Figure 1–1 Front Panel Layout

Speakers: Audio monitoring is achieved through the use of class D

amplifiers driving two (left/right) wide range speakers.

Headphone Jack: A class B amplifier drives the front panel 3.5 mm

jack for an optional headphone.

Balance and Volume Rotary Knobs: Control knobs are on the left and

right of the front panel video displays. The left knob controls the

Volume and the speaker output and can be programmed to control the

AES and Analog outputs. Pressing this control drops the internal

speaker volume by 20 dB. Pressing it a second time mutes the internal

Speakers

Headphone Jack

Volume

(Rotary Knob)

Balance and Menu

Navigation

(Rotary Knob)

Video Monitor

Hot Keys/Menu Buttons

Data/Menu

Monitors

Menu Navigation Buttons