User guide

821697: AMP1-16 Series User Guide

Appendix C Setting Up File Transfers

Navigating to the Unit Information Menu

Navigating to the Unit Information

1. Turn the unit on and navigate to the Unit Information Menu as

shown in Figure C–1 below.

A. When the Main Screen appears, press the Save/Exit button

to display the Configuration Selection Menu.

B. When the Configuration Selection Menu appears, press

the Options knob to display the Option Configuration

C. When the Option Configuration Menu appears, press the

Config HW knob to display the Hardware Configuration

D. When the Hardware Configuration Menu appears, press

the Unit Info knob to display the Unit Information Menu.

E. When the Unit Information Menu appears, press the

S/W Update button to display the ENABLE FTP button.

Figure C–1 Unit Information Menu

2. Note the line of text at the top of the window with the FTP address. It

should read something like

ftp://192.168.0.2/.

Unit S/W Info

Serial /

Ethernet Info

ENABLE FTP

Software Update Instructions

ftp://0.0.0.0/

See also the instructions sent with the software

update package provided by Wohler.

Now, press ENABLE FTP to enable the internal

FTP server, or press any other screen control

to cancel.

Once software updates are enabled, this screen

will go blank. Unplug and then re-power the unit

to halt the FTP server and cause it to restart .

Unit S/W Info

Unit Information Menu