User guide

821697: AMP1-16 Series User Guide
© 2011 Wohler Technologies, Inc. All rights reserved.
94
Appendix B Establishing Connectivity
Connecting Directly
5. Highlight the Internet Protocol (TCP/IP) check box.
6. Click the
Properties button. You should see another dialogue box like
the one shown in Figure B–6 below.
Figure B–6 Internet Protocol (TCP/IP) Properties
Dialog - Unconfigured
7. Record any current settings in this dialogue box, because they may need
to be changed.
IP Address: _________________________________________
Subnet Mask: _________________________________________
Default Gateway: _________________________________________
Preferred DNS: _________________________________________
Alternate DNS: _________________________________________
8. Click the Use the following IP address radio button.
9. Type in the address 192.168.0.1.
10. Type in the subnet mask 255.255.255.0.