User guide

821024: AMP1-DA/106 User Guide

AMP1-DA/106 User Guide

FCC Compliance

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Description

All AMP1-DA/106 model comes equipped with a stereo volume

control, balance pot, power indication LED, and headphone output.

Output limiter circuits are incorporated to protect the speakers, and

extensive magnetic shielding allows placement immediately adjacent to

video monitors without causing display interference.

It also features two selectable AES input sources on unbalanced BNC

connectors and a stereo analog input source on two balanced XLR

connectors. A toggle switch on the front panel allows selection of AES

source 1 or 2 while another toggle switch selects between the selected

AES digital source and the analog source inputs. A red LED indicates

the presence and error status of the selected AES signal entering the

unit.

Two high-resolution 106-segment tri-color LED bargraph level meters

display the audio levels for the left and right selected sources. An

additional pair of XLR connectors are provided on the rear panel for

outputing an analog signal of the selected sources for connecting to

downstream equipment.