User guide

821024: AMP1-DA/106 User Guide

AMP1-DA/106 User Guide

Rear Panel 10-Position DIP Settings for the Level Meters

Figure 1–11 Phase Correlation

Positive amounts of correlation are indicated by an ascending amber

bar in the lower (right channel) bar graph; negative correlation is

shown when a redbar ascends in the top (left channel) bar graph. While

the audio level in both channels is high enough, the Phase Correlation

indication occupies the bottom 13 segments of both bargraphs of a 106-

segment stereo pair. One additional segment above the active

correlation region is always off, to serve as a marker. The correlation

display is visible only so long as the VU audio level is above this blank

segment (fourteenth segment up on the 106-segment bargraph).

Alternate Scales

The standard scale used on the AMP1-DA/106 unit is the Extended VU

scale. However, if alternative scale characteristics are selected for the

level meters by setting the Alternate Scale DIP switches, it is

recommended that a label with the appropriate scale be applied to the

front panel LED bargraph level meters. Alternate scales include the VU,

BBC, Nordic, and DIN scales. See the diagram below for 106-segment

alternate scale labels. Contact Wohler Technologies for more

information about Alternate Scale labels.