User guide

© 2010 Wohler Technologies, Inc. All rights reserved.
6
AMP V Series User Guide
Specifications
Specifications
Table 1–1 lists the specifications for the AMP V Series monitors.
Table 1–1 AMP V Series Monitors Specifications
Specifications AMP1-V2DA AMP1-VTR2 AMP2-VSDA
Level Meter Type
26-Segment 53-Segment
Tri-Color (red, amber, green) LED Bar Graph
Segment Size .158” x .04” (4.0132 mm x 1.016 mm)
Peak Hold (selectable) Manual, 3 sec, 10 sec, or off
Dynamic Range 62 dB 65 dB
Scale +12 to -50 db + 16 to -50 dB
Bar Graph Scales VU, Ext, VU, BBC, Nordic, or Din
Midscale Resolution 1 dB
Input Connectors
4 Analog (Phoenix)
2 AES (BNC)
8 Analog (Phoenix)
4 Analog (XLR)
2 AES (XLR/BNC)
1 SDI (BNC)
Analog Input Impedance Phoenix: 200k  balanced Phoenix: 90k  balanced XLR: 70k  balanced
Digital Input Impedance BNC: 75  unbalanced —
BNC: 75  unbalanced
XLR: 110  balanced
Input Level for Maximum
Output (Volume Full On)
0 dBv balanced; -10 dB unbalanced
Peak Acoustic Ouptut
(@ 2 ft.)
98 dB SPL 104 dB SPL
Frequency Response, Sixth
Octave
80 Hz to 16 kHz ± 7 dB
(-10 dB @ 50 Hz, 22kHz)
80 Hz to 16 kHz ± 5 dB
(-10 dB @ 40 Hz, 20kHz)
Power Output
RMS Each Side (4)
RMS Bass (4)
10 W transient/5 W continuous
20 W transient/10 W continuous
14 W transient/
10 W continuous
35 W transient/
25 W continuous
Distortion, Electrical < 0.15% at any level below input threshold
Distortion, Acoustic
8% or less at worst case frequencies aove 180 Hz
including cabinet resonance; typically less than 2%
6% or less at worst case
frequencies aove 180 Hz
including cabinet
resonance; typically less
than 1.5%
Hum and Noise Better than -68 dB below full output
Magnetic Shielding < 1 Gauss any adjacent surface
< 0.8 Guass any adjacent
surface
Power Consumption 35W 45 W
AC Mains Input 100 to 240 V AC, 50 to 60 Hz Universal
Weight 10 lbs. (4.53 kg) 18 lbs. (8.2 kg)
Dimenstions (H x W x D) 1.7” Hx 19” W x 12” D (43 mm x 483 mm x 305 mm)
3.5” H x 19” W x 12” D
(89mm x 483mm x 305mm)