User guide

821091: AMP1-MADIe User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
46
Chapter 4 Internal Menu System
Version and Ethernet Menu
• Connect LAN: Pressing this button selects between a LAN
connection and a Direct connection.
• Finished: Pressing this button closes this menu and returns to the
Monitoring Screen.
Important:
If the IP information has been changed, the unit will have to restart. A
warning diamond will display, and you will need to confirm or cancel
before proceeding.
If the information in the IP fields is not correct, the changes made in
the IP fields will be ignored. The IP address is valid if the screen reads
“DHCP Mode Enabled” or “Static IP Mode Enabled.”
Important:
This enables a single-address DHCP server. Thus, when a computer is
connected directly, both the unit and the host computer will be
assigned a DHCP address, and they will be able to communicate.
However, this setting will cause problems with some LANs. If this unit
will be connected to a LAN, leave this setting in the
Connect: LAN
setting which disables the internal DHCP server.