User guide

821091: AMP1-MADIe User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
42
Chapter 4 Internal Menu System
Meter Type and Reference Menu
minutes to 119 minutes (in 1-minute increments) and from 2 hours
to 24 hours (in 1-hour increments). The default setting is 8 hours.
If the AMP1-MADIe is in operation for the screen saver time out
period and no front panel controls have been turned or pressed, the
screens will dim by a certain amount. If double the screen saver
time out period elapses without any front panel control activity, the
screens will dim further. Operating any button or control will
instantly brighten the screens.
• BNC: Pressing this button selects the BNC input as the MADI
source. The system will reclock the signal and then feed it to the
BNC output and also convert it to the multimode fiber optical
output.
• Fiber: Pressing this button selects the multimode fiber optical input
as the MADI source. The system will reclock the signal and then
feed it to the optical output and also convert it to the BNC output.
• Channel Volume Acceleration: Pressing this button toggles
between
On and Off. The acceleration feature is turned on by
default and allows you to quickly adjust the channel volumes with
the Channel Volume knob while still allowing you to make fine
adjustments.
Meter Type and Reference Menu
The Meter Type and Reference Menu allows you to define the level
meter scale, float, bar and reference.
Figure 4–5 Meter Type and Reference Menu
Meter Type & Reference Menu
Back
0 dBr = 0 dBFS Reference
Next
AES
IEC1
Scale
Float
0
-60
-50
-40
-30
-10
-20
VUBar
Press Scale or Reference, then
turn Channel Volume to adjust.
Post Fade
Metering
Mode
To quickly exit Menus, press Channel Volume for 3 seconds