User guide

821091: AMP1-MADIe User Guide

Chapter 4 Internal Menu System

Options Menu

• Bass: Pressing this button and then turning the Channel Volume

knob adjusts the bass response up or down in 2 dB steps to as low as

-12 dB or as high as +12 dB.

• Treble: Pressing this button and then turning the Channel

Volume

knob adjusts the treble response up or down in 2 dB steps

to as low as -12 dB or as high as +12 dB.

• Audio Delay: You can add up to 170 ms of delay to the speaker and

analog outputs in one ms increments. Turn the knob clockwise to

increase the delay, or counter-clockwise to decrease. When the

value reaches zero, the screen will display

Off.

Options Menu

The Options Menu allows you to adjust the brightness of each screen

independently, and to set the duration of inactivity before the screen

saver activates. It also allows you to specify the selected input.

Figure 4–4 Options Menu

• Screen Bright: Press this button to toggle between the adjustment

for the left screen and the right screen. After selecting a screen,

rotate the

Channel Volume knob to adjust the screen brightness.

Thirty-two adjustment steps are provided for each screen from very

dim to bright to compensate for dimly or brightly lit rooms. The

actual brightness of each screen will change as the control is turned.

The default brightness for both screens is 22.

• Screen Saver: Pressing this button and then rotating the

Channel

Volume

knob selects the screen saver time out. Select values from 5

Options Menu

NextBack

8 hrsScreen Saver

Press to select, then turn the

Trim control to adjust .

MADI Input

Multimode Fiber Input

Coax Copper Input BNC

Fiber

Screen Bright

22 22

Left Right

To quickly exit Menus, press Channel Volume for 3 seconds

Chan Volume

Acceleration