User guide

ManualsBrandsWohler ManualsComputer equipmentAMP1-MADIe

821091: AMP1-MADIe User Guide

Chapter 4 Internal Menu System

Audio Menu 2

• Fixed: Pressing this button prevents the Master Volume and

Channel Volume controls from affecting the analog outputs. They

will output all unmuted channels at a fixed line level.

• Master Volume: Pressing this button enables the

Master Volume

and

Balance controls to affect the analog outputs. This setting can

be convenient to use when monitoring is always done through the

analog outputs with external amplifiers and speakers.

• Channel Volume: Pressing this button enables/disables the

individual channel volume settings to affect the analog outputs.

Audio Menu 2

Figure 4–3 Audio Menu 2

Flat, Bass, and Treble together form a Tone Control. The bright

gold color indicates the settings that are in effect.

• Flat: Pressing this button sets the

Bass and Treble to 0 dB,

producing a flat response. However, the system retains the

Bass

and Treble settings so that they can be recalled if the Bass or Treble

controls are enabled.

Note:

Note, if the Analog Output is set to Master Volume/

Balance Controlled

and the Speaker Mute is set to

Always, then plugging in the headphones will cause

the analog outputs to mute.

Audio Menu 2

Flat response, tone controls

set to 0 dB

Flat

NextBack

Tone Controls

To quickly exit Menus, press Channel Volume for 3 seconds

0 dB

Bass

Treble

The Tone

Controls

affect the

speaker

sound only.

4 ms Audio Delay

Note:

The Tone Control only affects audio to the speakers. The

analog outputs and headphone output are not affected.