User guide

821091: AMP1-MADIe User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
36
Chapter 3 AMP1-MADIe Graphical User Interface (GUI) Manager
The USB Tab
• Manual: Clicking this button allows you to read this document in
.pdf format.
The USB Tab
Using a Flash Drive
You can use a USB flash drive to transfer settings from one
AMP1-MADIe to another, and to or from any Windows computer. This
tab allows you to save or retrieve files from a USB flash drive attached
to the host computer.
Figure 3–9 AMP1-MADIe Manager USB Screen
The
Flash Drive Connected indicator (bottom right of the screen)
shows when a flash drive is connected to the USB port of the host
computer by turning gold (on). Otherwise, it is brown (off).
Flash Drive Files
This pane displays a list that shows the eight possible files in the
\Wohler folder of the flash drive. If no \Wohler folder exists, the
system will immediately create it when the flash drive is first
Note:
To use the USB port from the AMP1-MADIe menu system,
refer to USB Port Functionality on page 20.
Wohler AMP1-MADIe Manager v01.00
USBChannels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8Preset 1 Options Ethernet
Programming Files
Connection Type
Flash Drive Files
Save to FlashRead from Flash Rename Flash Drive Connected
Drive <No Drive>
Eject
Current
Name
Channels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8 Options Ethernet USBCurrentPreset 1 Facility