User guide

821091: AMP1-MADIe User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
34
Chapter 3 AMP1-MADIe Graphical User Interface (GUI) Manager
The Ethernet Tab
The Ethernet Tab
Figure 3–8 Ethernet Tab
The Ethernet tab allows you to transmit configurations and perform a
variety of other tasks over a network. It also allows you to connect to an
AMP1-MADIe over a LAN to remotely configure the unit.
Click on one of the units in the Units Responding window to connect
to it.
File Update Options
Before beginning any update procedure, click either Update as
Needed
or Update All.
• Update as Needed should be used for most updates.
• Update All should only be used at the direction of a tech support
representative.
Wohler AMP1-MADIe Manager v01.00
EthernetChannels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8Preset 1 Options USB
File Update Options
Update as Needed
Update all
Programming Files
Check for Updates
Show Local File Versions
Documentation
Readme ManualOpen Log
Channels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8 Options Ethernet USBCurrentPreset 1 Facility
Units Responding
Locate IP Config IPRefresh Update
IP Address Unit Name MAC Address Unit Type
Disconnect From Remote Unit
192.168.0.50 Production 00-00-03-45-67-89 AMP1-MADIe
Note:
For a complete description of the functions in the
Programming Files area (used to attach AMP1-MADIes to
a network) refer to Appendix B on page 61.
For a complete description of the functions in the Units
Responding
area when preforming a software upgrade,
Refer to Appendix A on page 53 for details.
Note:
To continue with a software upgrade, refer to Appendix
B on page 61.