User guide

821091: AMP1-MADIe User Guide

Chapter 3 AMP1-MADIe Graphical User Interface (GUI) Manager

The Options Tab

• Master Volume Controlled: The volume of the outputs is

controlled by the

Volume and Balance knobs on the front panel.

Audio Delay

Click either No Delay, or click the up or down arrows to either

increase or decrease the amount of audio delay time from 0 (default) to

170 ms in 1 ms increments.

Functions Enabled

Click to enable or disable the following front panel functions:

• Select Preset button

• Channel Assignment button

• Menu system

Tone Controls

• Flat: (default) For a flat speaker response, click Flat.

• Bass and Treble: Press the Bass or Treble buttons and use the

Channel Volume knob to adjust the internal speaker bass and

treble from -12 dB to +12 dB in 2 dB steps.

Channel Knob Acceleration

• On: (default) Turns the Channel Knob Acceleration on. When

Channel Knob Acceleration is turned on, slowly turning the

Channel Knob will result in slow, careful one step per click

changes. Rapidly turning the knob will result in very rapid skipping

through the range of possible knob settings. It will help you adjust

settings quickly.

Note:

The Analog Output can be both Channel Volume

Controlled

and Master Volume Controlled.