User guide

821091: AMP1-MADIe User Guide

Chapter 3 AMP1-MADIe Graphical User Interface (GUI) Manager

The Options Tab

Input Selection

The AMP1-MADIe comes with two inputs, BNC and optical. Click the

input you wish to use.

Screen Brightness

Select the screen brightness for each screen and the duration for the

screen saver.

• Left/Right: Either click the down arrow to increase or decrease the

screen brightness value, or click the field and type in a value.

• Screen Saver: Enter the amount of time you want the monitor to

wait until it invokes the screen saver. Allowable values range (in

one minute increments) from five minutes to 119 minutes, and (in

one hour increments) from two hours to 24 hours. The default

setting is eight hours.

If the AMP1-MADIe is in operation for the screen saver time out

period and no front panel controls have been turned or pressed, the

screens will dim. If double the screen saver time out period elapses

without any front panel control activity, the screens will dim

further. Operating any button or control will instantly brighten the

screens.

Analog Output

Click to select one of three output volume options. Fixed Level and

Mute Controlled

is exclusive of the other two:

• Fixed Level and Mute Controlled: The volume of the output is

fixed at line level.

• Channel Volume Controlled: The analog outputs are controlled by

the

Channel Volume settings.

Note:

If the Analog Output is set to Fixed Level & Mute

Controlled

and the Speaker Mute is set to Always, then

plugging in the headphones will cause the analog outputs to

mute.