User guide

821091: AMP1-MADIe User Guide

Chapter 3 AMP1-MADIe Graphical User Interface (GUI) Manager

The Options Tab

Level Meters

• Click the drop downs to select the Scale, and then the Float, and

Bar for your level meter display. Alternatively, you can click the

Meter Scale Default button to return to the defaults for the

chosen meter scale.

• In the

Meter Segments area, click the up or down arrows to select

the levels at which the colors between the top and middle segments

and the middle and lower segments change.

• Click the up or down arrows to select the colors for each of the level

meter segments.

Metering Mode

Metering Mode: Click to select either Pre Fade or Post Fade.

• Pre Fade: Meters show the levels before the channel volumes are

applied to the input signals.

• Post Fade: (Default) Meters show the levels after the channels are

applied to the input signals.

Speaker Mute

In the Speaker Mute area, click to select one of three speaker

configurations:

• Never: Never mute the speakers even when headphones are

connected.

• Phones: Only mute the speakers when the headphones are

connected.

• Always: Always keep the speakers muted. This option may be

useful if you only want to monitor audio externally, through the

XLR audio outputs on the rear panel.