User guide

821091: AMP1-MADIe User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
21
Chapter 2 Operation
USB Port Functionality
Figure 2–12 Get a Setup From the Flash Drive Screen
2. From the bright green choices, select the configuration file you
want to copy from the flash drive to the AMP1-MADIe. If you
change your mind and no longer want to get a file, press the
Cancel/Quit button. Once the copy process completes, the Flash
Drive Connected
screen re-displays.
3. Remove the flash drive from the USB port.
Copying a Configuration File from the AMP1-MADIe
1. To copy a file to the flash drive from the AMP1-MADIe, press
Save from the Flash Drive Connected screen. The Save to
Flash Drive
screen will display as shown in Figure 2–13 on page
21.
Figure 2–13 Save to Flash Drive Screen
Get a setup from the Flash Drive
File 5
File 6
File 7
File 1
File 2
Cancel/QuitFile 4
File 3
Select the Flash
Drive file number
1 to 7 from which
to get a new
AMP1-MADIe
configuration
To exit without making
any changes, press
Cancel/Quit
Note:
The configuration takes effect immediately when you
press the File button. It includes all eight presets plus
the current configuration.
Save to Flash Drive
File 5
File 6
File 7
File 1
12345678901234567890
File 2
Cancel/QuitFile 4
File 3
Select the Flash
Drive file number
1 to 7 in which to
save the current
configuration of
this AMP1-MADIe
To exit without saving,
press Cancel/Quit