User guide

821091: AMP1-MADIe User Guide

Chapter 2 Operation

USB Port Functionality

Press Save and your settings will be instantly saved.

USB Port Functionality

You can copy configuration files to and from your unit by a flash drive

connected to the USB port.

Immediately after connecting the flash drive to your AMP1-MADIe, the

Flash Drive Connected screen displays (interrupting any current

functions except an Ethernet connection) as shown in Figure 2–11

below.

Figure 2–11 Flash Drive Connected Screen

Copying a Configuration to the AMP1-MADIe

1. To load a configuration file to the AMP1-MADIe from your flash

drive, press

Get. The Get a setup from the Flash Drive screen

will display as shown in Figure 2–12 below. The files that exist on

the flash drive will be lit in bright green.

Flash Drive Connected

Get System Configuration

from Flash Drive

Save System Configuration

to Flash Drive

Get

Save

Note:

All configuration files are automatically saved with a

.wmad extension in the \Wohler folder.