User guide

821091: AMP1-MADIe User Guide

Chapter 2 Operation

Adjusting the Volume of Each Channel

• Press the Channel Volume knob to select where you want to

monitor this channel: the Left, Right, or Center (both channels).

• Rotate the Channel Volume knob to select a MADI channel.

Repeat this with other channels as needed. Press the Channel

Assign

ment button to exit this screen and return to the Main Screen.

Adjusting the Volume of Each Channel

You can adjust the volume of each channel individually. Press the

Channel Select button(s) adjacent to the channel(s) you want to

change to highlight them in yellow. Then turn the yellow Channel

Volume

knob. The green line under the meters for these channels will

lengthen or shorten according to the Channel Volume knob position,

indicating how much you are changing the volume.

Adjusting the Speaker Audio Tone

Controls

Depending on the listening environment, you may need to adjust the

tone of the audio to improve the sound coming from the speakers. You

can do this with the digital

Bass and Treble tone controls provided in

Audio Menu 2.

1. To adjust these controls, hold the Channel Volume knob for at

least three seconds until Audio Menu 1 displays.

2. Press the Next button to proceed to Audio Menu 2.

Note:

The channel names shown cannot be changed from this

menu. They can be changed from the Manager software.

Refer to Chapter 3.