User guide
821091: AMP1-MADIe User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
13
Chapter 2 Operation
Selecting Different Channels for Monitoring
Selecting Different Channels for
Monitoring
Default Presets
By default, the eight presets in the AMP1-MADIe are set up to monitor
the 64 MADI channels as shown in Table 2–1 below.
So, to monitor channels 9 through 16 instead of 1 through 8, press the
Select Preset button. The Preset Selection Menu will appear as
shown in Figure 2–2 below.
Figure 2–2 Preset Selection Menu
Then press the button corresponding to Preset 2 on the screen and the
Preset Action Menu will appear as shown in Figure 2–3 on page 14.
Table 2–1 AMP1-MADIe Preset Defaults
Preset
Monitored Channels
1 2 3 4 5 6 7 8
112345678
2 9 10 11 12 13 14 15 16
3 1718192021222324
4 2526272829303132
5 3334353637383940
6 4142434445464748
7 4950515253545556
8 5758596061626364
Preset Selection
Preset 5
Default 5
Preset 6
Default 6
Preset 7
Default 7
Preset 1
Master Control
Preset 2
Truck 1
Preset 4
Default 4
Preset 3
Truck 2
Select a Preset
to save or
recall.
To exit without
changing
anything, press
Preset Select
again.
Preset 8
Default 8