User guide

821091: AMP1-MADIe User Guide

Chapter 2 Operation

Initial Operation

When you first power your AMP1-MADIe, it will be ready to monitor

the first eight MADI channels from the BNC input. Turning up the

Master Volume will let you hear all eight channels at once. By default,

the odd-numbered channels will sound in the left speaker, and the

even-numbered channels will sound in the right speaker, but you can

easily change this any way you like.

Chances are that you will want to change this operation to better suit

your needs. This chapter is devoted to explaining how to easily make

the changes you need so that the AMP1-MADIe operates just the way

you need it to.

Monitor Channel Selection

Any or all of the eight metered channels can be mixed to the speakers

and monitored. To change the channels you hear, press the Channel

Select

button(s) adjacent to the channels you want to change. This will

highlight them in bright yellow. After doing this, pressing the yellow

Channel Volume knob will mute or unmute these channels. The blue

channel icons in the middle of the screens are bright if the channel is

unmuted or dark if it is muted.

Figure 2–1 Main Screen with One Channel Selected

for Modification

PCR1-AD

Bob

-60-50 -40 -30 -20 -10 0

PCR1-GFX

Phil

PCR3-PGM

PCR2-DIR

Bucky

MUTED

REM-24

NVG/NYJ

ANNC-12

Costas

TAPE-SUP

Dave

REM-12

LONDON

Preset 1: Master Control

-60-50 -40 -30 -20 -10 0

MUTED

Unit Name

Post Fade

Metering