User guide

821091: AMP1-MADIe User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
9
Chapter 1 Installation
Main Screen
blue channel icons. Rotate the Channel Volume knob to adjust the
level of the highlighted channel(s). The narrow bar under each level
meter shows the position of the Channel Volume knob for each
channel. The yellow Channel Volume knob always works for only
the yellow highlighted channels.
Adjust the Master Volume and Balance controls as necessary.
You can also give the channels unique names. Simply connect a PC
to the Ethernet port and run the AMP1-MADIe GUI setup program.
Refer to Appendix A on page 53 for details.
You can also give this AMP1-MADIe unit a unique name. Simply
connect a PC to the Ethernet port and run the AMP1-MADIe GUI
setup program. Refer to Appendix A on page 53 for details.
For more information on using the AMP1-MADIe, continue on to
Chapter 2: Operation on page 11.