User guide

821091: AMP1-MADIe User Guide
© 2012 Wohler Technologies, Inc. All rights reserved.
7
Chapter 1 Installation
Rear Panel
Rear Panel
Figure 1–2 Rear Panel Layout
• Power: The AMP1-MADIe uses a standard IEC power cord for the
100 to 240 VAC ±10%, 50/60 Hz power connection.
• MADI Inputs: (1 Coax, 1 Optical) These two connectors accept
either 56- or 64-channel MADI input signals.
• MADI Outputs: (1 Coax, 1 Optical) These two connectors output
either 56- or 64-channel MADI output signals.
• Ethernet: The Ethernet port can connect to either a LAN or to a PC
to let you customize the AMP1-MADIe configuration. It will also
allow you to copy system configurations from one AMP1-MADIe to
another. Lastly, it can be used to update the AMP1-MADIe software
and firmware. Refer to Chapter 3, Appendix A, and Appendix B for
details.
• Analog Outputs: These male XLR connectors provide three
balanced analog outputs:
Left, Mono Mix, and Right. The source
of these signals is the mix of audio monitored by the internal
speakers.
RIGHTLEFT MONO MIX
BALANCED
ANALOG OUT
MADI
IN OUT
100-240 VAC
50/60 Hz
MADI
OUT IN
ETHERNET
Power
Ethernet
MADI I/O 1 and 2
(Inputs and Outputs)
Analog Audio Outputs
(Left, Mono Mix, & Right)