User guide

82 10 91: A M P1 - MA DI e Use r Gu id e
© 2013 Wohl er Tec hn ologi e s , In c . Al l r ig h ts re se rved.
73
Ap pe nd ix B Software Upgrades
Up g ra din g th e A MP 1- M AD Ie Ov e r Et her n et
Performing the Upgrade
Figure B–9 AMP1-MADIe Manager SDI Ethernet
Screen
1. To update the AMP1-MADIe of your choice, click the one you
want to update from the Units Responding area.
2. Click Update.
Wohler AMP1-MADIe Manager v01.00
EthernetChannels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8Preset 1 Options USB
File Update Options
Update as Needed
Update all
Programming Files
Check for Updates
Show Local File Versions
Documentation
Readme ManualOpen Log
Channels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8 Options Ethernet USBCurrentPreset 1 Facility
Units Responding
Locate IP Config IPRefresh Update
IP Address Unit Name MAC Address Unit Type
Disconnect From Remote Unit
192.168.0.50 Production 00-00-03-45-67-89 AMP1-MADIe
WA RN I NG !
Do not interrupt the process of automatically installing and verifying
the software.
Note:
The AMP1-MADIe will discontinue its normal operation
while the software update is taking place. Do not interrupt
the process of automatically installing and verifying the
software. This process will take several minutes after which
the AMP1-MADIe will restart.
Im p ort an t:
This concludes the AMP1-MADIe software upgrade procedure.