User guide

8 21 09 1 : AM P 1- MAD Ie Us er G u ide
© 2 01 3 Woh le r Te ch nolo gie s, Inc . All ri g ht s res e r ve d.
68
Ap pe nd ix B S oftw a re U p gra de s
Up g ra di n g th e So f tw ar e Us ing a U S B Fl a sh D ri v e
Upgrading the Software Using a USB
Flash Drive
If a product software upgrade appears on the flash drive after insertion,
the Flash Drive Connected screen displays as shown in Figure B–1
below.
Figure B–1 Flash Drive Connected Screen
1. Press Update Menu to display the Flash Drive Software
Update menu in Figure B–2 below.
Figure B–2 Flash Drive Software Update
Im p ort an t:
If you have not already done so, place a software update onto the flash
drive using the instructions in Programming Files on page 42.
USB software updates can only be performed if the unit has firmware
version 3.00 or later. Earlier versions must be updated using the
Ethernet port.
Flash Drive Connected
Get System Configuration
from Flash Drive
Save System Configuration
to Flash Drive
Get
Save
There is a Software Update
on this Flash Drive
Update Menu
To exit this Menu, please
unplug the Flash Drive
Flash Drive Software Update
Update Software
as Needed
Cancel/Quit
To exit without installing
software,
press Cancel/Quit
View Versions
The installed software
is up to date.
Update only the outdated
parts of the software.
(Recommended)
Replace Software
Unconditionally
Update the software
regardless of version.
(Use cautiously)
Note:
In Figure B–2, the software version is up to date and no
update is needed.