User guide

82 10 91: AMP 1- M AD I e U se r G u ide

CHAPTER 1

Installation

Introduction

Overview

The AMP1-MADIe-SM and AMP1-MADIe-MM are 1RU, 8 of 64

channel MADI audio monitors. Each contains a BNC MADI input and

output plus (depending upon the model purchased) either a single-

mode or a multi-mode fiber input and output. Although the AMP1-

MADIe-SM (single-mode fiber) and AMP1-MADIe-MM (multi-mode

fiber) are distinct models, largely their operation is identical, so they

will be referred to in this manual as simply AMP1-MADIe. This unit

comes with two 2.4” graphics screens that display eight channels of

audio level metering. Any eight channels in the MADI stream may be

audibly and visually monitored. The AMP1-MADIe is small, low-cost,

and simple to operate. Its setup configuration can easily be copied to

other AMP1-MADIe units.

Note that very little configuration should be necessary. We have

already configured the unit to the most commonly requested settings.

However, should you need to change these settings, you can access the

unit either through the front panel menu system, or remotely through a

PC graphical user interface (GUI).

Topics

Topics Page

Safety 2

Compliance 4

Front Panel 5

Rear Panel 7

Main Screen 8