User guide

82 10 91: A M P1 - MA DI e Use r Gu id e
© 2013 Wohl er Tec hn ologi e s , In c . Al l r ig h ts re se rved.
47
Ch apt er 4 Internal Menu System
O pti o ns Me n u
• Bass: Pressing this button and then turning the Channel Volume
knob adjusts the bass response up or down in 2 dB steps to as low as
-12 dB or as high as +12 dB. Pressing Bass a second time moves the
highlight to the Low Cut setting. Pressing the Channel Volume
knob turns low cut on or off. When it is turned on, an additional
low-cut filter is engaged.
• Treble: Pressing this button and then turning the Channel
Volume knob adjusts the treble response up or down in 2 dB steps
to as low as -12 dB or as high as +12 dB.
• Audio Delay: You can add up to 170 ms of delay to the speaker and
analog outputs in one ms increments. Turn the knob clockwise to
increase the delay, or counter-clockwise to decrease. When the
value reaches zero, the screen will display Off.
• Audio Channel Select: When on the Main Screen you can choose
to limit the selection of channels to be adjusted to either a single one
or to multiple channels. Pressing this button alternates the choice
between Single, Multiple, and Quick.
Options Menu
The Options Menu allows you to adjust the brightness of each screen
independently, and to set the duration of inactivity before the screen
saver activates. It also allows you to specify the selected input.
Figure 4–4 Options Menu
• Screen Bright: Press this button to toggle between the adjustment
for the left screen and the right screen. After selecting a screen,
Options Menu
NextBack
8 hrsScreen Saver
Press to select, then turn
Channel Volume to adjust.
MADI Input
Single-Mode Fiber Input
Coax Copper Input BNC
Fiber
Screen Bright
22 22
Left Right
ON Reclocking
Press and hold Channel Volume to exit menu.