User guide

8 21 09 1 : AM P 1- MAD Ie Us er G u ide

Ch apt er 3 A M P1- M AD Ie G r a ph ica l Us e r I nt er fac e (G U I ) M ana g er

The U SB T a b

flash drive file is not selected. The system will only read the files

from the \Wohler folder on the flash drive.

• Rename: To rename a configuration file, click on the filename you

want to rename and then click Rename. When the dialog displays,

rename the file and click Save.

• Save to Flash: Clicking the Save to Flash button saves all eight

presets, the Current preset configuration, and the Options to the

selected empty or existing file on the connected flash drive. If you

want to save to an existing file, a dialog box opens to confirm that

you really want to overwrite the file. If you want to save to an

empty file, a dialog box opens so you can name the file. The saved

file will automatically start with the same number (1 through 7) as

the selected file. Files can only be saved to the \Wohler folder on

the flash drive.

Programming Files

This pane relates to preparing a flash drive to be used to update the

software in AMP1-MADIe units.

• Check for Updates: Clicking on this button checks the Wohler

website for updated software, and if it exists, it downloads it.

• Create Update on Flash Drive: Whether a new update was

available on the Wohler website or not, this button can be used to

create a software update on the attached USB flash drive. After this

operation is performed, AMP1-MADIe units will recognize that an

update is available on the flash drive and will offer to update

themselves from it.

Note:

Units with versions prior to 3.00 will not perform a

software update from a USB stick. This must be done

using the Ethernet port.