User guide

82 10 91: AM P1- M AD I e U se r G u ide

C hap t er 3 AMP1-MADIe Graphical User Interface (GUI) Manager

T h e U S B T ab

The USB Tab

Using a Flash Drive

You can use a USB flash drive to transfer settings from one

AMP1-MADIe to another, and to or from any Windows computer. This

tab allows you to save or retrieve files from a USB flash drive attached

to the host computer.

Figure 3–8 AMP1-MADIe Manager USB Screen

The Flash Drive Connected indicator (bottom right of the screen)

shows when a flash drive is connected to the USB port of the host

computer by turning gold (on). Otherwise, it is brown (off).

Flash Drive Files

This pane displays a list that shows the eight possible files in the

\Wohler folder of the flash drive. If no \Wohler folder exists, the

system will immediately create it when the flash drive is first

connected. Clicking on any one of the files (or the empty file positions)

selects it for other operations.

• Read from Flash: Clicking on the Read from Flash button loads

the selected file into the program. This button is disabled if a valid

Note:

To use the USB port from the AMP1-MADIe menu system,

refer to USB Port Functionality on page 22.

Wohler AMP1-MADIe Manager v01.00

USBChannels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8Preset 1 Options Ethernet

Programming Files

Connection Type

Flash Drive Files

Save to FlashRead from Flash Rename

Flash Drive Connected

Drive <No Drive>

Eject

Current

File Name

Channels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8 Options Ethernet USBCurrentPreset 1 Facility

File #

Programming Files

Check for Updates

Create Update on Flash Drive