User guide

8 21 09 1 : AM P 1- MAD Ie Us er G u ide
© 2 01 3 Woh le r Te ch nolo gie s, Inc . All ri g ht s res e r ve d.
38
Ch apt er 3 A M P1- M AD Ie G r a ph ica l Us e r I nt er fac e (G U I ) M ana g er
The E th e r ne t Tab
• Master Volume Controlled: The volume of the outputs is
controlled by the Volume and Balance knobs on the front panel.
The Ethernet Tab
Figure 3–7 Ethernet Tab
The Ethernet tab allows you to transmit configurations and perform a
variety of other tasks over a network. It also allows you to connect to an
AMP1-MADIe over a LAN to remotely configure the unit.
Click on one of the units in the Units Responding window to connect
to it.
Note:
The Analog Output can be both Channel Volume
Controlled and Master Volume Controlled.
Wohler AMP1-MADIe Manager v01.00
EthernetChannels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8Preset 1 Options USB
File Update Options
Update as Needed
Update all
Programming Files
Check for Updates
Show Local File Versions
Documentation
Readme ManualOpen Log
Channels Preset 2 Preset 3 Preset 4 Preset 5 Preset 6 Preset 7 Preset 8 Options Ethernet USBCurrentPreset 1 Facility
Units Responding
Locate IP Config IPRefresh Update
IP Address Unit Name MAC Address Unit Type
Disconnect From Remote Unit
192.168.0.50 Production 00-00-03-45-67-89 AMP1-MADIe
Note:
For a complete description of the functions in the
Programming Files area (used to check on file versions)
refer to Appendix B on page 67.
For a complete description of the functions in the Units
Responding area when preforming a software upgrade,
Refer to Appendix A on page 59 for details.