User guide

82 10 91: AM P1- M AD I e U se r G u ide

C hap t er 3 AMP1-MADIe Graphical User Interface (GUI) Manager

T h e Cu rr e nt T ab

• Channel Number: Click the drop-down menu to select the MADI

channel (1 through 64) you want to monitor in this position.

• Speaker Assignment: Click the drop-down menu to select the

speaker(s) you want to hear this channel in: Left, Center (both), or

Right. The Channel Assignment icon will change accordingly.

Channel Position Locks

The Channel Position Locks keep individual channel positions from

being assigned differently than the Monitoring Position in the

section above on this tab. Click to toggle the indicators. Red means that

the channel position is locked, as shown in channel positions 1 and 2 in

Figure 3–3 on page 30.

Channel Volume dB

Channel Volume: Select the volume for this channel from -61 dB to

0 dB.

• Setting a volume to -61 dB displays Mute in the selection field.

• Setting a volume to 0 dB displays Max in the selection field.

The Current Tab

The Current tab shows the settings in actual use in the connected

AMP1-MADIe selected on the Ethernet tab after you use the Get

from Unit button to retrieve the settings.

Note:

This lock applies to changes that can be made in the

AMP1-MADIe Channel Assignment Menu.

Note:

The name of the Current Preset cannot be changed: it is

always called the Current preset.