User guide

8 21 09 1 : AM P 1- MAD Ie Us er G u ide

Ch apt er 3 A M P1- M AD Ie G r a ph ica l Us e r I nt er fac e (G U I ) M ana g er

Run n ing t he A MP 1 -MA D I e Ma n ag er

Running the AMP1-MADIe Manager

The AMP1-MADIe Manager allows you to customize the monitor’s

configuration to perfectly suit your needs.

Activity Log and Setup Files

Note that the Activity Log and the Setup Files areas (Figure 3–1

below) display at the bottom of the screen regardless of the tab you

have selected.

Figure 3–1 AMP1-MADIe Manager SDI Setup

Screen

• Status Line: This line of text (above the Activity Log) shows the

Ethernet Address, MAC Address, and the name of the connected

unit on the left side, and the current preset name and number on the

right.

• Activity Log: This area displays all the network activity between

your PC and the AMP1-MADIe including connecting,

disconnecting, saving files, and so on. It also shows information for

monitoring network activity and for diagnostic purposes.

• Save to PC: Clicking this button displays the Windows Save As

dialog so you can save your configuration file to your PC.

Note:

When the AMP1-MADIe manager is connected to a unit, the

front-panel controls will return to the Main Screen, and

will not allow the user to enter any of the menu screens or

the USB Screen until the manager is disconnected from the

unit. The indicator will appear on the

AMP1-MADIe screen.

Remote Access

Preset 1 – Master Control

Select Preset

1 2 3 4 5 6 7 8

Activity Log

Save to PC Open from PC Get from UnitSend to Unit

Setup Files

Selected Unit: [192.168.0.50] [00:00:03:45:67:89] Production