User guide

8 21 09 1 : AM P 1- MAD Ie Us er G u ide

Ch apt er 2 O pe ra ti on

Up d at e Me n u

Figure 2–14 Save to Flash Drive Screen

2. The bright blue choices indicate files that already exist. Press the

file number that you want to copy the AMP1-MADIe configuration

to (including all eight presets plus the current configuration). If

you change your mind and no longer want to save a file, press the

Cancel/Quit button. Once the copy process completes, the Flash

Drive Connected screen re-displays.

3. Remove the flash drive from the USB port.

Update Menu

This button only appears if the inserted flash drive contains a software

update. Press this button to proceed to the software updating menu.

You can copy a software update onto a flash drive using the MADIe

Manager PC GUI program available on the Wohler website

(www.wohler.com). Refer to The USB Tab on page 41 for adding a

software update to a flash drive. Refer to Appendix B: Performing the

Upgrade on page 73 for upgrading the AMP1-MADIe software.

Menu Lockout Override

Even though you may have disabled the menu access in The Options

Tab on page 34, you can override this lockout to gain access to the

menu system. As long as the monitor is not currently being remotely

accessed, you can hold down the Channel Volume knob while also

Save to Flash Drive

File 5

File 6

File 7

File 1

12345678901234567890

File 2

Cancel/QuitFile 4

File 3

Select the Flash

Drive file number

1 to 7 in which to

save the current

configuration of

this AMP1-MADIe

To exit without saving,

press Cancel/Quit