User guide

82 10 91: AM P1- M AD I e U se r G u ide
© 2013 Wohl er Tec hn ologi e s , In c . Al l r ig h ts re se rved.
21
Ch apt er 2 Operation
Sa vin g Y o ur Set ti ng s
Press the Metering Mode button to change between Post Fade and
Pre Fade. Then press the Back or Next buttons several times to exit to
the Main Screen.
Saving Your Settings
Once you have set up your AMP1-MADIe exactly the way you want it,
you will probably want to save the settings for a quick recall, just in
case someone else accidentally disturbs them. To do this, simply press
the Select Preset button. The Preset Selection Menu will appear
as shown in Figure 2–9 below.
Figure 2–9 Preset Selection Menu
The AMP1-MADIe provides eight presets. Press the number of the
preset you want to save your settings to. The Preset Action Menu
will display as shown in Figure 2–10 below.
Figure 2–10 Preset Action Menu
Press Save and your settings will be instantly saved.
Preset Selection
Preset 5
Default 5
Preset 6
Default 6
Preset 7
Default 7
Preset 1
Master Control
Preset 2
Truck 1
Preset 4
Default 4
Preset 3
Truck 2
Select a Preset
to save or
recall.
To exit without
changing
anything, press
Preset Select
again.
Preset 8
Default 8
Recall this Preset
Save the current config
to this Preset
Recall
Save
Exit with no changes at
all
Exit
Current Config: Default 1
Selected Preset: Default 8 (Preset 8)